Face & Halo Lit Channel Letters & Logo Signs on Raceway

Weatherproof, high output LEDs are pre-installed inside all Face & Halo Lit channel letters. System is 100% complete and ready to install. Lit Letters and Logos are preinstalled on the all aluminum Raceway. Standard 5 inch depth on all letter heights. Signs can be installed indoors or outdoors. We conduct a 32 point quality inspection during manufacturing.

Modified High impact Acrylic Faces are available in standard colors or any Pantone or Sherwin Williams Color as well as Designer Faces. Internal illumination though the face with Super Bright LEDs, with a second complete set of LEDs for the Halo Lighting.

The Back of the Halo Lit Sign, has rear facing LEDs, these LEDs form the halo that reflects against the Background. The Rear Facing Halo LEDs are protected by a translucent polycarbonate cover. Halo Lighting is also available in almost any color desired.

All electric components of the Raceway Mounted sign are contained inside the metal raceway. Also included with the raceway is our Sun Control switch. You can choose to have your sign on continuously or to have the sign automatically turn on and off with the sun. The Raceway has a metal mounting flange on the top and bottom. Fasteners can be installed anywhere through this flange to your structure.

We will provide a 6', 3 wire 120volt A/C whip that connects to your power like any light fixture.

All Raceway Mounted Face and Halo Lit letters have a "Background" (shown in red) behind the letters to reflect the halo light. Behind the letters and in front of the raceway is an aluminum composite background panel. This panel provides a surface for the rear facing LEDs to reflect against. Without the Background, the halo would shine onto the raceway and the wall, each of these surfaces are different distances from the letters and would not create the desired effect.

Raceway Sign Length is almost unlimited. Each section of the raceway is no longer than 10 feet. each 10 foot section of the raceway simplay plugs into the previous section. We put the power connections and switch in the first section. this makes shipping and installation much easier.